Custom Shower Rod Sizes For Your Curved Rod – Rotator Rod

Custom Shower Rod Sizes For Your Curved Rod

If you have a non-standard tub/shower and don't want the hassles of a tension shower rod there aren't many options. That's where we come in.  

The Rotator Rod, with it's unique ability to rotate in and out, can be custom fitted to most tub/shower sizes.  Each stock Rotator Rod fits a "standard" tub opening measuring 58.5 - 60". But if you happen to have a shower/tub opening smaller (43" - 58.5") or larger (60" - 72") we can provide a Custom Cut rod that will work perfectly!  

For the shorter sized rods, we cut each half of the rod equally, then re-drill new holes for the stabilizing pins.   To make longer rods, we cut and insert a precisely fitted piece of rod with our patented lock-tight system assuring the strength and Smooth Glide/No-Bump qualities of the rod are preserved.  

In addition, the Rotator Rod has a 1.5" adjustability built in.  Each end has a retractable Insert that automatically adjusts to smaller variations in width.   We recommend you measure your opening even if you have a "standard" tub.  Sometimes thicker tile is used or even multiple layers of wall board have been installed over time.

There are 2 Steps To placing an order for your Custom Size.  After you've selected your finish, you will enter the measurement of the opening, from wall to wall to the nearest 1/4" and enter that into the box in step 1.  Then you'll choose a Custom Cut from the drop-down menu.  That's it - we'll take it from there!  

Here's an image of those steps: